| 1. | Ensure (from driver's seat) that parking brake is applied. |
| 2. | Ensure gear lever is in neutral position. (In "P" or "N" for automatic transmission) |
| 3. | Check for obstructions. |
| 4. | Check for warning lights and gauges, where applicable. |
| 5. | Check seat adjustment for correct driving position. |
| 6. | Check all mirrors for maximum rear view vision. |
| 7. | Turn ignition key to be in the "on" position without starting the engine. |
| 8. | Check electric window operation, if applicable. |
| 9. | Check all instruments and mention any changes. |
| 10. | Check operation of front and rear lights, indicators, horn and wipers, if applicable. |
| 11. | Switch ignition off and return all switches to "off" position. |
| 12. | Check steering for excessive free play. |
| 13. | Check pressure on brake and clutch pedals. |
| 14. | Return wipers to normal position, where applicable. |
| 15. | Check that doors are properly closed and that passengers are conversant with operation of doors. |
| 16. | Fasten seatbelt and request passengers to fasten seatbelts. |
| 17. | Ensure that passengers are conversant with operation of release mechanism of seatbelts. |
Note A:
The examiner shall request the applicant to operate the lights, direction indicators, horn and wipers, where these shall be checked for operation, by such examiner.
Note B:
The examiner may allow minor defects to be rectified, however, no extra time shall be allowed. (The stopwatch shall not be stopped)
Note C:
Item 1 and 2 as well as 5 and 6 shall be checked in sequence.
