National Road Traffic Act, 1996 (Act No. 93 of 1996)NoticesK53 Practical Driving Test for Motor Vehicle Drivers, Volume 2 - Heavy Motor Vehicles : Codes CI, C, ECI and EC6. The modulesModule 4: Starting and switching off procedures |
Starting engine:
| 1. | Turn the fuel tap/valve "ON", if applicable. |
| 2. | Turn ignition key to "ON" position and check operation of warning lights and metres. |
| 3. | Ensure that the gear is in neutral. (Green warning light on) |
| 4. | Switch the engine "kill" switch to the "RUN" position. |
| 5. | Operate the choke, if necessary. |
| 6. | Start engine by pressing the start button or by kick starting it. |
| 7. | Release starter button/kick starter as soon as engine starts (Fold kick start lever back, if necessary) |
| 8. | Cancel choke operation when applicable. |
Stopping engine:
| 1. | Switch accessories off, if applicable. |
| 2. | Stop engine by operating the engine 'kill' switch. |
| 3. | Turn ignition key to "OFF" position. |
| 4. | Turn fuel tap/valve off, if applicable. |
| 5. | Select first gear, if applicable. |
Note A:
For certain motorcycles it is necessary to pull in the clutch and/or return the side stand to the secure position in order to start the engine.