Civil Aviation Act, 2009 (Act No. 13 of 2009)RegulationsCivil Aviation Regulations, 2011Part 21 : Certification Procedures for Products and PartsSubpart 11 : Export Airworthiness Approvals21.11.1 Export airworthiness approvals |
| (1) | An export airworthiness approval for— |
| (a) | a Class I product, shall be issued in the form of an export certificate of airworthiness; and |
| (b) | a Class II or a Class III product, shall be issued in the form of an export airworthiness approval tag. |
| (2) | An export airworthiness approval may be issued for— |
| (a) | any new aircraft other than an aircraft referred to in paragraph (b), which has been assembled and flight tested, and any other Class I product located in the Republic; |
| (b) | any small aeroplane, glider or normal category rotorcraft which has been type certificated and manufactured under a production certificate; |
| (c) | any used aircraft with a valid certificate of airworthiness, or other Class I product which has been maintained in accordance with the provisions of Part 43 and is located in a foreign State, if the Director is satisfied that the location does not impede the administration of the provisions of this Part; |
| (d) | any Class II or Class III product manufactured and located in the Republic. |