Civil Aviation Act, 2009 (Act No. 13 of 2009)RegulationsCivil Aviation Regulations, 2011Part 148 : Manufacturing OrganisationsSubpart 1 : General148.01.5 Safety inspections and audits |
| (1) | (1) An applicant for a manufacturing organisation approval shall permit an authorised officer, inspector or authorised person to carry out safety inspection or audit as may be necessary to verify compliance with prescribed requirements. |
| (2) | A holder of a manufacturing organisation approval shall permit an authorised officer, inspector, or authorised person to carry out safety inspection or audit, including any safety inspection or audit of any of its partners or subcontractors, which may be necessary to determine compliance with the appropriate requirements prescribed in this Part. |
| (3) | Inspection and audit fees, as prescribed in Part 187, shall be payable in respect of inspections and audits referred to in subregulation (1), and for any inspection considered necessary by the Director in order to adjudicate on the suspension of an approval issued in terms of this Part. |
| (4) | Any non-compliance or findings determined by safety inspection or audit shall be categorised as prescribed in Document SA-CATS 148. |
[Regulation 148.01.5 substituted by regulation 43(a) of Notice No. R.1503, GG45491, dated 15 November 2021 (Twenty-First Amendment of the Civil Aviation Regulations, 2021)]